Blog · Advice
Standard window sizes
A window is made to the size of the opening, not the other way round. But some sizes come up so often that they have practically become standard — and it helps to know where your opening falls.
The most common sizes
| Size | Sashes | Where it is most often found |
|---|---|---|
| 60×60 cm | 1 | Bathroom, store, pantry |
| 80×120 cm | 1 | Kitchen, a smaller room |
| 100×120 cm | 1 | A room in a flat |
| 120×140 cm | 2 | Living room, the standard in apartment buildings |
| 140×140 cm | 2 | Living room in a new-build |
| 180×140 cm | 2 | A large opening, often with a fixed pane |
| 240×140 cm | 3 | A three-sash opening, living room |
| 80×220 cm | 1 | A balcony door |
Prices for all of these sizes are in the PVC window price table.
How to measure the opening
- Measure the structural opening — the hole in the wall, not the existing window. The old frame stays in the wall only when the new window is fitted over the existing frame.
- Measure the width in three places: top, middle, and bottom. Take the smallest figure.
- Do the same for the height — left, middle, right. The smallest figure is the one that counts.
- Also note the wall thickness, because the width of the internal window board depends on it.
- Photograph the opening from inside and outside. A photograph often says more than a number.
This measurement is for a guide quote. For production, we measure — a mistake of a centimetre on our measurement is our cost; on yours, it is yours.
Why two centimetres change the price
Profiles are supplied in lengths and cut to size, but the glass is ordered piece by piece. Crossing a certain dimension changes the glass thickness and the hardware category — and that is a step in the price, not a gradual rise.
That is why a window of 138 cm and a window of 142 cm can be in different price bands even though the difference looks trivial.
Non-standard sizes
Arched windows, triangular gables, round openings, and positions over two and a half metres fall outside every table. We make them, but they are priced only after measuring, and they usually need a drawing.
If you have an opening like that, send a photograph with the enquiry — it is often clear from the picture what is feasible.
We will measure instead of you
Free, at your address, with an itemised quote within 48 hours.
Book a measuring visit →More from the blog
Triple glazing: is it worth it, and what does it cost
Triple glazing costs an extra 3,054 RSD (≈ 26 €) per m² of glass with us. When it pays back through heating, how fast, and when double glazing is enough. Worked example.
Aluminium windows price per m²: a rough 2026 range and what it depends on
Thermally broken aluminium windows cost roughly 280–400 € per m² in Serbia; cold profiles are cheaper. What drives the price, an example, and when it pays.
Adjusting PVC windows: winter and summer mode, and when to call a service engineer
What PVC window winter mode means, how to check sash contact, and when to call a service engineer. A practical guide to maintaining and adjusting MACO hardware.
RAL window installation: what it is, how it is done, and what it costs
What RAL window installation is, how the joint is sealed, and what it costs. The Danito RAL surcharge is 1,175 RSD (≈ 10 €) per metre including VAT. See a worked example and book a measuring visit.